본문 바로 가기

로고

국내 최대 기계 및 로봇 연구정보
통합검색 화살표
  • RecurDyn (리커다인)
  • 기술보고서

    기술보고서 게시판 내용
    타이틀 Spray and Combustion Characteristics of a Liquid-fueled Ramjet Combustor
    저자 Masaki SASAKI, Mamoru TAKAHASHI, Hiroshi SAKAMOTO, Akinaga KUMAKAWA, Nobuyuki YATSUYANAGI, Motohiro SEI, Kazuhiko YOSHIMURA, Takao INAMURA
    Keyword liquid atomization; spray combustion; ramjet engine; rocket-ramjet engine; jet penetration; flame holding; flammability range; combustion efficiency
    URL http://send.nal.go.jp/send/jpn/dlpdf.php3/naltr0001349t.pdf?id=NALTR0001349T
    보고서번호 NAL TR-1349T
    발행년도 1998.07
    출처 NAL (National Aerospace Laboratory of Japan)
    ABSTRACT Spray characteristics and combustion characteristics of a liquid-fueled ramjet combustor were experimentally investigated. A liquid fuel was injected transversely into a subsonic hot vitiation air-stream. The penetrations of the liquid jet under hot airflow conditions were larger than those calculated by the empirical equation obtained under room-temperature airflow conditions. A V-shaped gutter was attached to the center of the combustor for flame holding. Two different arrangements of the gutter and fuel injector were tested. In one of them, the fuel was injected perpendicular to the gutter axis, and in the other, the fuel was injected parallel to the axis. In the case of perpendicular fuel injection, a region with a temperature higher than 1500K was observed at the center of the combustor; this region was long and narrow in the direction of fuel injection. The high temperature region reached the bottom wall due to involvement of the fuel in the wake region of a fuel injector. In the case of parallel injection, the high temperature region covered almost the whole cross section of the combustor except in the vicinity of the bottom wall, and the measured combustion efficiencies were higher than those in the case of the perpendicular fuel injection. Pilot fuel injection from the gutter was very effective for the improvement of combustion characteristics. It was also found that the fuel dispersion in the direction injection of high temperature fuel, which simulates the regerative cooling of a ramjet combustor, was smaller than that of low temperature fuel due to fuel evaporation.

    서브 사이드

    서브 우측상단1