공학DB
한국과학기술원 Intelligent Systems and Vibration Control laboratory
실험실 소개 이미지
실험실 정보안내
지도교수 이인
전공분류 진동(Vibration)
주소 대전시 유성구 구성동 한국과학기술원 기계항공해양시스템공학부 항공우주공학전공 (305-701)
전화
홈페이지 http://isvc.kaist.ac.kr/
실험실소개

 

  한국과학기술원 기계공학과 항공우주공학전공의 지능시스템 및 진동제어 연구실은 이 인 교수님 지도하에 1987년 설립되었습니다. 현재 이인 교수님과 박사과정 학생 12명, 석사과정 학생 2명이  항공기, 헬리콥터, 미사일 등 비행체 설계에 필수적인 유체/구조 연계 시스템의 진동 특성과 구조/제어 연계 시스템인 지능 구조물 분야에서 다양한 연구를 수행하고 있습니다. 본 연구실은 수많은 석박사 졸업생들을 배출하여 국방과학연구소, 한국항공우주연구원, 한국항공우주산업㈜, 삼성전자, 현대자동차 등 국책연구소 및 산업체에서 활발한 연구개발 활동을 하고 있으며, 6명의 박사 졸업생들은 국내 대학에서 교수직으로 후학을 양성하는데 많은 노력을 기울이고 있습니다. 
 

연구분야

 

  지능시스템 및 진동제어 연구실은 항공기, 인공 위성, 미사일, 발사체 등 주요 항공우주 구조물의 경량화 설계에 수반되는 각종 진동 문제를 해석하고, 안정성을 판단하며, 설계 변경 또는 능동 제어를 통한 구조물의 진동 저감과 안정성 획득에 관한 연구를 수행하고 있습니다. 고속 비행체의 경우 일반적인 기계 구조물과 달리 항공기에 작용하는 공기력과 구조물의 상호작용에 의한 진동 문제가 매우 중요하며, 이에 관한 연구 분야를 공력탄성학(Aeroelasticity)이라 하는데, 본 연구실의 주요 연구 분야 중 하나입니다. 그리고, 구조물의 성능 향상을 위해 압전 재료, 형상기억 합금 등을 이용한 구조물의 능동 진동제어와 광섬유 센서 등을 이용한 구조물의 안정성 모니터링 연구를 진행하고 있으며, 원통형 복합재 압력 용기에 대한 충격 해석 및 파열 압력 예측에 관한 연구를 진행하고 있습니다.

연구성과
Seung-Jun Lee, Byoung-Gyu Cho and In Lee
Two-dimensional unsteady aerodynamics analysis based on a multiphase perspective
Computers & Fluids, 2012 , ,Vol. 53No. 15 ,pp. 105 ~ 116(SCIE, 0:0.0

Kim, S.-W., Kim, E.-H., Rim, M.-S., Shrestha, P., Lee, I., Kwon, I.-B
Structural Performance Tests of Down Scaled Composite Wind Turbine Blade Using Embedded Fiber Bragg Grating Sensors
International Journal of Aeronautical & Space Science, 2011 , ,Vol. 12No. 4 ,pp. 346 ~ 535(SCIE, 0:0.0

Cho, S.-I., Yoo, S.-J., Kim, E.-H., Kim, S.-W., Lee, I., Park, K.-C., and Kwon, I.-B.
Effects of Bonding Layer Characteristics on Strain Transmission and Bond Fatigue Performance
Journal of Adhesion Science and Technology, 2011 , ,Vol. 0No. 0 ,pp. 0 ~ 0(SCIE, 0:0.0

Joonbae Lee, Kwanjung Yee, Seung-Jae Yoo, In Lee, SangJoon Shin and Deog-Kwan Kim
Aeroelastic Analysis of a Hingeless Rotor using a Dynamic Wake Model
Journal of Aircraft, 2011 , ,Vol. 48No. 5 ,pp. 1817 ~ 1822(SCIE, 0:0.0

Rim, M.-S., Kim, E.-H., Lee, I., Choi, I-H., Ahn, S.-M., Koo, K.-N., Bae, J.-S., Roh, J.-H.
Low velocity impact characteristics of composite plates with shape memory alloy wires
Journal of Theoretical and Applied Mechanics, 2011 , ,Vol. 49No. 3 ,pp. 841 ~ 857(SCIE, 0:0.0

Min-Soo Jeong, Myung-Chan Cha, Sang-Woo Kim, In Lee, Taeseong Kim
Effects of torsional degree of freedom, geometric nonlinearity, and gravity on aeroelastic behavior of large-scale horizontal-axis wind turbine blades under varying wind speed conditions
Journal of Renewable and Sustainable Energy, 2014 , ,Vol. 6No. 2 ,pp. 1 ~ 19(SCIE, 0:0.0

Sang-Woo Kim, Eun-Ho Kim, Min-Soo Jeong, In Lee
Damage Evaluation and Strain Monitoring for Composite Cylinders using Tin-coated FBG Sensors under Low-velocity Impacts
Composites Part B: Engineering, 2015 , ,Vol. 74No. 0 ,pp. 13 ~ 22(SCIE, 0:0.0

Min-Soo Jeong, Myung-Chan Cha, Sang-Woo Kim, In Lee
Numerical Investigation of Optimal Yaw Misalignment and Collective Pitch Angle for Load Imbalance Reduction of Rigid and Flexible HAWT Blades under Sheared Inflow
Energy, 2015 , ,Vol. 84No. 1 ,pp. 518 ~ 532(SCIE, 0:0.0

Min-Soo Jeong, Sang-Woo Kim, In Lee, Seung-Jae Yoo
Wake impacts on aerodynamic and aeroelastic behaviors of a horizontal axis wind turbine blade for sheared and turbulent flow conditions
Journal of Fluids and Structures, 2014 , ,Vol. 50No. 0 ,pp. 66 ~ 78(SCIE, 0:0.0

프로젝트
[큰 가로세로비 날개의 공탄성 해석] eroelastic analysis of high-aspect-ratio wing

[복합재료 및 복합재 구조물의 손상 해석] Damage analysis of composite materials and structures

[헬리콥터 로터 블레이드의 공탄성 해석] Aeroelastic analysis of helicopter rotor blade

[풍력 터빈 블레이드의 공탄성 해석] Aeroelastic analysis of Wind Turbine Blades

[형상기억합금 삽입을 통한 복합재료 구조물의 충격 특성 향상] Improvement of impact resistance of composite structures by embedding SMAs