본문 바로 가기

로고

국내 최대 기계·건설 공학연구정보
통합검색 화살표
  • Particleworks(CFD S/W)
  • 국내학술지

    게시판 상단 게시물 검색바

    논문검색

    논문분석 리스트

    기계분야 End milling of DIN 1.2714 die steel with cryogenic CO2 cooling
    End milling of DIN 1.2714 die steel with cryogenic CO2 cooling

    저자: ▷ Jebaraj M.(Jebaraj M.)▷ -(Pradeep Kumar M.)
    출저:Journal of Mechanical Science and Technology | 2019
    16 0

    기계분야 Modelling and characteristic investigation of spindle-holder assembly under clamping and centrifugal forces
    Modelling and characteristic investigation of spindle-holder assembly under clamping and centrifugal forces

    저자: ▷ Shaoke Wan(Shaoke Wan)▷ -(Jun Hong)▷ Fei Du(Fei Du)▷ -(Bin Fang)▷ Xiaohu Li(Xiaohu Li)
    출저:Journal of Mechanical Science and Technology | 2019
    8 0

    기계분야 Analysis of tool wear performance and surface quality in post milling of additive manufactured 316L stainless steel
    Analysis of tool wear performance and surface quality in post milling of additive manufactured 316L stainless steel

    저자: ▷ -(Yadong Gong)▷ Pengfei Li(Pengfei Li)
    출저:Journal of Mechanical Science and Technology | 2019
    8 0

    기계분야 Using a DoE for a comprehensive analysis of the surface quality and cutting speed in WED-machined hadfield steel
    Using a DoE for a comprehensive analysis of the surface quality and cutting speed in WED-machined hadfield steel

    저자: ▷ K.Mouralova(K.Mouralova)▷ L.Benes(L.Benes)▷ J.Bednar(J.Bednar)▷ R.Zahradnicek(R.Zahradnicek)▷ T.Prokes(T.Prokes)▷ P.Hrabec(P.Hrabec)▷ Z.Fiserova(Z.Fiserova)▷ J.Otoupalik(J.Otoupalik)
    출저:Journal of Mechanical Science and Technology | 2019
    8 0

    기계분야 Hole exit damage and tool wear during the drilling of CFRP with a double-point angle drill
    Hole exit damage and tool wear during the drilling of CFRP with a double-point angle drill

    저자: ▷ Pengnan Li(Pengnan Li)▷ -(Xinyi Qiu)▷ Changping Li(Changping Li)▷ Anhua Chen(Anhua Chen)▷ 고태조(T. J. Ko)
    출저:Journal of Mechanical Science and Technology | 2019
    8 0

    기계분야 Prevent weld line defects on an automotive crash pad by local heating and cooling with 3D printed insert core
    Prevent weld line defects on an automotive crash pad by local heating and cooling with 3D printed insert core

    저자: ▷ 조용하(Yong-Ha Cho)▷ 김재홍(J.H.Kim)▷ 이명근(Myeong-Geun Lee)▷ 김병민(Byung-Min Kim)
    출저:Journal of Mechanical Science and Technology | 2019
    8 0

    기계분야 Investigation on the hard turning in enhancing the surface reliability by white layer elimination using cbn semi worn-out inserts under shielding gas atmosphere
    Investigation on the hard turning in enhancing the surface reliability by white layer elimination using cbn semi worn-out inserts under shielding gas atmosphere

    저자: ▷ M.Omkumar(M.Omkumar)▷ S.Girisankar(S.Girisankar)
    출저:Journal of Mechanical Science and Technology | 2019
    8 0

    기계분야 Effect of narrow infill density gap on the compressive properties of 3D printed carbon fibre reinforced acrylonitrile butadiene styrene
    Effect of narrow infill density gap on the compressive properties of 3D printed carbon fibre reinforced acrylonitrile butadiene styrene

    저자: ▷ Abdul Manaf Abdullah(Abdul Manaf Abdullah)▷ Dasmawati Mohamad(Dasmawati Mohamad)▷ Tuan.N.A.Tuan Rahim(Tuan.N.A.Tuan Rahim)▷ Hazizan Md Akil(Hazizan Md Akil)▷ Zainul Ahmad Rajion(Zainul Ahmad Rajion)
    출저:Journal of Mechanical Science and Technology | 2019
    5 0

    기계분야 Experimental investigation and finite element simulation of the effect of surface roughness on nanoscratch testing
    Experimental investigation and finite element simulation of the effect of surface roughness on nanoscratch testing

    저자: ▷ Mohsen Nazemian(Mohsen Nazemian)▷ Mohammad Chamani(Mohammad Chamani)
    출저:Journal of Mechanical Science and Technology | 2019
    6 0

    기계분야 Analysis of micro and nano particle erosion by analytical, nmerical and experimental methods: A review
    Analysis of micro and nano particle erosion by analytical, nmerical and experimental methods: A review

    저자: ▷ Suhas M.Shinde(Suhas M.Shinde)▷ D.M.Kawadekar(D.M.Kawadekar)▷ Pradeep A.Patil(Pradeep A.Patil)▷ Virendra K.Bhojwani(Virendra K.Bhojwani)
    출저:Journal of Mechanical Science and Technology | 2019
    5 0

    NDSL학술지정보

    논문분석 리스트

    스월 노즐의 분무 미립화 및 실린더 내 혼합기 형성 특성

    저자: ▷ 1(서현규)
    출처:대한기계학회논문집 A | Year : 2019 | Vol : 43
    0

    역청탄의 자연발화 및 저온산화반응에 관한 실험적 연구

    저자: ▷ 1(이대균)▷ 2( 김승모)▷ 3( 전충환)
    출처:대한기계학회논문집 A | Year : 2019 | Vol : 43
    0

    고출력 레이저용 빔 덤퍼 설계 및 성능 검증

    저자: ▷ 1(황순휘)▷ 2( 박인규)▷ 3( 양환석)▷ 4( 이정환)▷ 5( 이광현)
    출처:대한기계학회논문집 A | Year : 2019 | Vol : 43
    0

    석탄화력발전소 500MW급 증기터빈 설비의 위험도 평가를 통한 정비 주기 예측

    저자: ▷ 1(박상호)▷ 2( 박현구)
    출처:대한기계학회논문집 A | Year : 2019 | Vol : 43
    0

    열화상 카메라로 측정한 피부온도 기반 한서감 추정법

    저자: ▷ 1(김중경)
    출처:대한기계학회논문집 A | Year : 2019 | Vol : 43
    0

    사행 채널 폭의 치수 변화에 따른 바나듐 레독스 플로우 배터리의 성능 변화에 관한 수치해석적 연구

    저자: ▷ 1(김정명)▷ 2( 박희성)
    출처:대한기계학회논문집 A | Year : 2019 | Vol : 43
    0

    800kPa급 고압 CNG 인젝터가 적용된 1.4L T-GDI 엔진의 유해배출물 특성에 관한 실험적 연구

    저자: ▷ 1(조용석)▷ 2( 유준상)▷ 3( 김규성)▷ 4( 조민기)▷ 5( 이호길)▷ 6( 남충우)▷ 7( 김재광)▷ 8( 전완재)
    출처:대한기계학회논문집 A | Year : 2019 | Vol : 43
    0

    화학반응 메커니즘 축소화 연구를 통한 바이오디젤의 연소 해석

    저자: ▷ 1(임영찬)▷ 2( 서현규)
    출처:대한기계학회논문집 A | Year : 2019 | Vol : 43
    0

    A Study on Microcell Injection Molding Process for Automotive Armrests

    저자: ▷ 1(Seo, Bong Hyun)▷ 2( Noh, Sang Ho)▷ 3( Choi, Kwang Bok)▷ 4( Jin, Kwang)▷ 5( Park, Sang Un)
    출처:大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A | Year : 2018 | Vol : 42
    0

    Development of Motion-platform Based Exercise Equipment for Rehabilitation Treatment and Posture Measurement

    저자: ▷ 1(Kim, Joon Hee)▷ 2( Son, SeungJe)▷ 3( Kim, Dong Hwan)
    출처:大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A | Year : 2018 | Vol : 42
    0

    서브 사이드

    서브 우측상단1